The compact PWE-S8 amplified 8” subwoofer system lets you add deep, accurate bass to your sound system without taking up space in your vehicle.
With the PWE-S8, the high-excursion 8-inch subwoofer and 120W (RMS) gives a strong bass output but with a tiny footprint.
With a shallow mount, the PWE-S8 is just 3-inches deep (at the deepest point), 13.5-inches wide and 9-inches tall, so is perfect for campervans and motorhomes where space is limited.
This subwoofer can be installed in any vehicle using either low-level RCA phono leads if being connected to an aftermarket head unit or via the speaker input cables if being connected to any other type of head unit – which allows for fitment practically anywhere in the vehicle, but we regularly install these underneath the front seats.
The side panel offers easy access to the RCA inputs, auto-sensing speaker inputs, Phase, Gain, Low Pass Crossover and Remote Sub Level controls for greater flexibility during installation. (The subwoofer also comes with a wired bass control gain knob)
ALPINE PWE-S8 – 8" ACTIVE SUBWOOFER
- 1x 8" Subwoofer
- 1x Wiring loom (15cm long only)
- 1x Set of instructions
PLEASE NOTE
- Installer will need to supply & extend all relevant cables for installation as not included with the subwoofer.
- 8-inch (20cm) Sealed Active Subwoofer
- Built-in 240W Amplifier (120W RMS)
- Frequency Response: 25 – 152Hz
- Volume Remote Controller (0 to-20dB / 4m cable)
- Phase Selector (0° / 180°)
- Adjustable cut-off Frequency (50 – 150Hz)
- RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
- Easy Under Seat Installation
- Full die-cast Housing (4.6Kgs)
- Dimensions: 340mm x 230mm x 70mm